IFP-50 Intelligent Fire Panel
The IFP-50 is an intelligent analog/addressable fire control panel. The IFP-50 system has a single SLC loop, which can support 50 SLC devices. The IFP-50 has two Notification Appliance Circuits that can be programmed for notification outputs, or auxiliary power. The control panel also has a built-in dual line digital fire communicator, Form C trouble relay, and two programmable Form C relays. The firmware has powerful features such as detector sensitivity, day/night thresholds, drift compensation and pre-trouble maintenance alert.
The IFP-50 supports a variety of other devices that can be added to the system such as the RA-100 Remote Annunciator, the Model 5824 Serial/Parallel Interface (for printing system reports), and the 5496 Intelligent Power Module.
Built-in support for 50 analog addressable points.
Uses standard wireno shielded or twisted pair required.
Built-in digital communicator for remote reporting of system activity and system programming.
Central station reporting by Point or by Zone.
Supports Class B (Style 4) and Class A (Style 6 or Style 7) configuration for SLC.
Distributed, intelligent power.
Built-in synchronization for appliances from Gentex®, Faraday, System Sensor®, and Wheelock®
Sensor sensitivity settings and Day/Night sensitivity setting.
Automatic drift compensation.
Notification circuits can be configured as 1 Class A (Style Z) or 2 Class B (Style Y), or auxiliary power for ressetable, constant, or door holder power.
Built-in annunciator with a backlit 80-character LCD display.
RS-485 bus provides communication to system accessories.
Built-in RS-232 interface for programming via PC.
Built-in Form C trouble relay rated at 2.5 amps at 24 VDC.
Two built-in Form C programmable relays rated at 2.5 amps at 24 VDC.
Individual addressable devices can be tested.
SLC device locator can be used to locate a single or multiple devices on a SLC loop.
System automatically performs detector sensitivity test.
13 preset notification cadence patterns including ANSI 3.41 and four user programmable patterns.
System can be uploaded or downloaded on site or from a remote location with a PC.
Non volatile event history stores up to 1000 events.
125 Software zones and 125 output groups.
Maximum charging capacity of 12 amp hours. (An additional cabinet enclosure is required for batteries in excess of 7 amp hours.)
SLC Supports multiple Device types. (See compatible addressable devices.) Any combination of addressable devices can be used on a single SLC loop (up to a 50 devices).
Up or Down load programming, event history, or detector status via remote or direct connection.
Integrated dead front panel protects operator from exposure to electrical components.
Programmable to automatically display initial event first or display tally of system events.
Acknowledge function allows operator to keep track of event status.